Assignment Detail:- Part 1 Inspection of Civil Structure
ASSESSOR NOTE
These instructions must be followed when assessing the student in this unit- The checklist on the following page is to be completed for each student- Please refer to separate mapping document for specific details relating to alignment of this task to the unit requirements-
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints-Assessment of essential underpinning knowledge will usually be conducted in an off-site context-Assessment is to comply with relevant regulatory or Australian standards' requirements-Resource implications for assessment include:• an induction procedure and requirement• realistic tasks or simulated tasks covering the mandatory task requirements• relevant specifications and work instructions• tools and equipment appropriate to applying safe work practices• support materials appropriate to activity• workplace instructions relating to safe work practices and addressing hazards and emergencies• material safety data sheets• research resources, including industry related systems information-
Reasonable adjustments for people with disabilities must be made to assessment processes where required- This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support-
This assessment task requires you to inspect a civil structure as nominated by your Assessor- This Assessment task requires the completion of a Level 1 inspection in accordance with local state legislation and regulations as per your state- The task requires you to:interpreting project contract specification requirementsapplying procedures to problem solvemaking decisions for activitycarrying out continuous improvement in meeting task outcomesand these will be relevant to the structure being assessed- Queensland inspection forms are included following for you to record your inspection- Note: Where specific state forms are relevant and available, the attached forms may be substituted with the mandatory state forms-
For the purposes of the assessment, civil structures that you are required to inspect will include one or more of the following:civil concrete structures, including:bridges, including their:foundationsabutmentspiersbeamsdeckspre-cast and in-situ elementsnormally reinforced and pre-stressed elementsretaining wallswater storage tanks and small damsnoise barriersculvertssafety barrierscivil steel structures, including:bridgessign gantriesvertical sign supportsnoise barrier supportsguardrailscivil timber structures, including:bridges, jetties and wharvesretaining wallsnoise barrierscivil masonry, crib and gabion structures, including:masonry wallscrib wallsgabion wallsfoundations for these walls
Aside from the Bridge and Culvert inspection forms, you must also complete the Inspection Record Form-
Inspection Activity Record
Site NameSide Location
Inspection DateInspection TypePurpose of Inspection
Required Equipment
Toolbox meeting date time and agenda
Observed site Hazards and Controls
Site Preparation Methods
Traffic Control
Inspection Methods
Defect Marking Procedures
Job Plan, including:human resource requirementsplant and machinery requirementsconstruction materials requirementssub-contractor support requirementswaste disposal requirementscoordination requirementsactivity schedulingmaterials delivery schedulingrisk assessment and management requirementswork health and safety -WHS- requirementsquality management requirements, including testing scheduling requirementstraffic management requirementsenvironmental requirementstask monitoring requirementstask performance monitoring requirementscommunication requirementsreporting requirements
Required Outcomes civil structures report requirementsinspection cost requirementsidentification of concrete structures and elements problems, such as:cracksdelaminationdisplacementwater where it should not berust stains andlime leachingidentification of steel structures and elements problems, such as:deflectioncorrosioncrackingdamaged protective coatingmissing, damaged or loose fasteningsIdentification of timber structures and elements problems, such as:deflectioncrackingrottinglaminationmoisturepest attackmissing, damaged or loose fasteningsidentification of masonry, crib or gabion structures and elements problems, such as:settlingcrackingmissing mortarefflorescenceweephole conditionSummary of Observations and Recommendations-
Assessment Part 2 - Inspection of Civil Structure
Assessment - Practical Parts
These instructions must be followed when assessing the student in this unit- The checklist on the following page is to be completed for each student- Please refer to separate mapping document for specific details relating to alignment of this task to the unit requirements-
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints-Assessment of essential underpinning knowledge will usually be conducted in an off-site context-Assessment is to comply with relevant regulatory or Australian standards' requirements-Resource implications for assessment include:• an induction procedure and requirement• realistic tasks or simulated tasks covering the mandatory task requirements• relevant specifications and work instructions• tools and equipment appropriate to applying safe work practices• support materials appropriate to activity• workplace instructions relating to safe work practices and addressing hazards and emergencies• material safety data sheets• research resources, including industry related systems information-
Reasonable adjustments for people with disabilities must be made to assessment processes where required- This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support-
This assessment task requires you to inspect a civil structure as nominated by your Assessor- This Assessment task requires the completion of a Level 2 inspection in accordance with local state legislation and regulations as per your state- The task requires you to: interpreting project contract specification requirements applying procedures to problem solve making decisions for activity carrying out continuous improvement in meeting task outcomesand these will be relevant to the structure being assessed- Generic Bridge and Culvert inspection forms are included following for you to record your inspection- Note: Where specific state forms are relevant and available, the attached forms may be substituted with the mandatory state forms-For the purposes of the assessment, civil structures that you are required to inspect will include one or more of the following:civil concrete structures, including:bridges, including their:foundationsabutmentspiersbeamsdeckspre-cast and in-situ elementsnormally reinforced and pre-stressed elementsretaining wallswater storage tanks and small damsnoise barriersculvertssafety barrierscivil steel structures, including:bridges sign gantriesvertical sign supportsnoise barrier supportsguardrailscivil timber structures, including:bridges, jetties and wharvesretaining wallsnoise barrierscivil masonry, crib and gabion structures, including:masonry wallscrib wallsgabion wallsfoundations for these walls
Aside from the Bridge and Culvert inspection forms, you must also complete the Inspection Record Form-
Required Outcomes Required Outcomes civil structures report requirementsinspection cost requirements identification of concrete structures and elements problems, such as:cracksdelaminationdisplacementwater where it should not berust stains and lime leachingidentification of steel structures and elements problems, such as:deflectioncorrosioncrackingdamaged protective coatingmissing, damaged or loose fasteningsIdentification of timber structures and elements problems, such as: deflectioncrackingrottinglaminationmoisturepest attackmissing, damaged or loose fasteningsidentification of masonry, crib or gabion structures and elements problems, such as:settlingcrackingmissing mortarefflorescenceweephole condition Summary of Observations and Recommendations
Attachment:- Inspection photos and information-rar
Most Recent Questions