Implement and monitor adherence to workplace health and

Assignment Detail:- SITXWHS003 Implement and monitor work health and safety practices Performance objective: The purpose of this assessment is to assess your ability to complete tasks outlined in elements and performance criteria of this unit in the context of the job role, and: a- Implement and monitor adherence to workplace health and safety procedures in three of the following real or simulated situations:o evacuation of staff and customerso security management of cash, documents, equipment, keys or peopleo handling chemicals and hazardous substanceso hazard identification and reportingo incident and accident reportingo risk assessment and reportingb- Coordinate consultative processes for managing the above workplace health, safety and security issuesc- Coordinate risk assessments, WHS training, and the maintenance of records relating to above situationsd- Monitor the effectiveness of the WHS system and identify:o required adjustmentso staff training needse- Demonstrate management practices that must be implemented for compliance with state or territory occupational health and safety -OHS- or WHS legislation during above situations Assessment description: Part A Planning WHS systems, consultation and risk assessment For the purpose of this assessment you need to provide for each situation listed below:a- Clear references to websites or sources including sections and pages where you located the relevant legislation b- An implementation plan that provides the steps and processes for planning consultation, risk assessment and implementation for each situation c- The actual records required to meet legislative requirements -for example consultation records for staff consultation/ where incident reporting is selected the appropriate form-s-/ where chemicals and hazardous substances are selected the relevant SDS, PPE register, training register etc-/ where security management of any kind is selected the relevant SOPs, emergency procedures, staff training records/ where evacuation is selected, the floorplan-s-, emergency procedures, wardens, forms for reports as relevant etc-- 1- You are required to plan the following situations:1- evacuation of staff and customers 2- security management of cash, documents, equipment, keys or people 3- handling chemicals and hazardous substances 2- Once your situations have been selected, you need to access the relevant codes of practice from the Safework website or the website governing WHS relevant for your state- 3- After you have identified the specific requirements for each situation you will need to plan, develop and implement consultation processes with your staff/ colleagues- Part B - Implementing, monitoring and evaluating WHS systems Part B requires you to implement and monitor the effectiveness of each situation to identify the need for adjustment and any training requirements for staff to overcome any shortfalls or non-compliance that is identified You are required to implement each situation based on the work you have planned and completed in Part A- 1- Brief all relevant staff before implementation to provide a refresher of the procedures that were finalised and determined during consultation and risk assessment2- Monitor each situation and ensure that any breaches are identified promptly-3- Use relevant templates or a log to document progress and incidents for each situation-4- Take appropriate actions to prevent any potential incidents, accidents or other hazards where a safety risk has been identified-5- Document each breach or shortfall you identify for each instance-6- Write a report summary for each situation and clearly outline the requirements for changes for each procedure based on the results in 4- and which type of training this will require as a result for each situation- BSBSUS411 Implement and monitor environmentally sustainable work practices The purpose of this assessment is to assess your ability to complete tasks outlined in elements and performance criteria of this unit in the context of the job role, anda- analyse information from a range of sources to identify current procedures, practices and compliance requirements in relation to environmental and resource sustainabilityb- consult and communicate with relevant stakeholders to seek input and encourage engagement with developing and implementing sustainability improvements, encourage feedback and suggestions and report on outcomesc- plan and organise work group activities to:o measure current resource usageo solve problems and generate ideas for improvementso evaluate and implement strategies to improve resource usageo plan, implement and integrate improvements into operationso meet environmental requirementsd- apply continuous improvement approach to sustainability performancee- apply change management techniques to support sustainability performance Part A requires you identify and analyse legal requirements and initiatives that relate to your industry and workplace- You are required to measure current resource usage, analyse purchasing strategies and current work practices in order to identify opportunities for improvement of resource usage and set new targets- Part B requires you to implement resource efficiency improvement plans by using techniques and tools to assist in achieving efficiency targets and monitor the performance of these- All written work must be your own- Any sources of information you access and use for this assessment must be clearly referenced- Part A A- Legislation and sources of information for resources and initiatives Question 1: Identify the environmental regulations which apply in your local government area relevant to your workplace activities and provide details what is covered by these regulations and by-laws???? Question 2: Identify any resources and initiatives which are in place or available in your state to help business to reduce their waste and use resources more efficiently???? Question 3: List 1 initiative that is relevant to your sector within the Tourism, Hospitality and Events Industry and list all resources which are available through these initiative-s-- Outline how these would be used???? B- Measuring current consumption and identifying existing procedures of work practices and purchasing: Conduct a practical assessment of your organisation's resources and practices- You may use the forms attached below to collect your data or any software available to you -for example you may create a spreadsheet using Microsoft Excel- For this purpose you need to complete the following activities: Question 1: Take the current meter reading for gas, electricity and water???? Question 2: Create a table or list and enter: All equipment and appliances used in one specific department -for example Kitchen, F&B etc--, and measure the consumption of electricity as listed on the appliance labels???? Question 3: Measure the flow rate for water of various taps using the formula "Flow rate = Volume/Time -L/min-"???? Question 4: Inspect the type of lighting used and determine the KW/H -1000 Watt = 1 KWH- used in that department based on typical or given workplace practices during operation???? Question 5: Inspect the provisions for recycling???? Question 6: Determine the intervals of waste collection and determine the size of the cubicle-s- used???? Question 7: This task is performed outside: Wearing gloves and using tongs, physically inspect the contents of garbage bins from your department and inspect the approximate waste for each category -Glass, paper, card board, green waste etc-- and express these in percent -approximately-???? Question 8: Determine the energy consumption ratings, use and settings of air conditioners and heaters where applicable and document the potential KWH usage for these units???? Question 9: Determine the resources required for any plants, landscaping or outside areas as relevant???? Question 10: List the purchasing strategies which are currently in place including environmentally sustainable approaches; carbon foot print considerations -for example use local supplies from growers etc--???? Question 11: Identify any workplace environmental and occupational hazards you may encounter during your resource analysis???? Question 12: Identify any breaches or potential breaches for environmental practices you have encountered in the audited area during your project and outline the issues???? C- Setting efficiency targets Question 1: Analyse the results you have obtained for usage of resources and compare these results against:• Work and workflow processes: - which improvements could be made????• Industry Schemes: - How do your results compare????• Technology: - Are you using efficient technology????• Resources: - Is there a benefit of switching e-g- from electricity to gas in some areas or using other measures????• Best Practice: - Are there recommendations from manufacturers or bodies that recommend particular practices???? Question 2: Set your targets in a table or spreadsheet based on your findings of the analysis- Question 3: Outline the provisions for communication this would require with key stakeholders relevant to yourposition and workplace and how this will be achieved- Include a template for an agenda and table for entering actions- Part B For this part of the assessment project you are required to write and environmental resource efficiency improvement plan which details the following: Question 1: The purpose of the plan Question 2: An overview what has been undertaken and why???? Question 3: The resource areas and targets you have established based on Section 3, Part A???? Question 4: The measures and tools you will implement to achieve these targets???? Question 5: Strategies that can be used to ensure staff compliance with environmental requirements and to achieve new targets???? Question 6: Strategies you will use for purchasing and selection of supply chains???? Question 7: A calculation which will provide information as to the potential savings that can be achieved over time, given the investment; For example:Use of e-g- 10 light bulbs rated at 0-060 KWH in Kitchen area could be replaced with 10 energy saving bulbs rated at 0-012 KWH which would represent an energy saving of -10 * 48 = 0-480KWH- 0-480 KW per hour x $0-28 = $ 0- 1344 per hour or at 10 hours per day: $ 0-1344 x 10 = $1-35/ Day-For a 7 day operation this then equates to a potential saving of $ 492-75 minus the proportion of the cost of the energy saving bulb @ $ 7-50 /5000 hours -$1-50 per 1000 hours use- versus an ordinary bulb @ $ 0-75 /1000 hours lifespan-10 Showerheads in guest rooms rated A could be replaced by ones rated AAA with a potential saving of -10 * 55 L = 550 L - 550 Litres per day etc- -0-55 x 1-80 = $ 0-99/day x 365 = $ 361-35/year- minus the initial cost forpurchasing the more efficient showerheads -for the first year only- Question 8: The provisions for communication to periodically discuss and network with colleagues to make adjustments and identify progress???? Question 9: A spreadsheet or set of tools which can be used to record and monitor periodic results from readings and invoices/ statements for utilities???? Question 10: Examples how you will evaluate strategies and make adjustments to the improvement plan???? Waste a- Review current waste contractual arrangementsb- Over 1 period conduct a visual waste audit of all rubbish bins• Observe what is being thrown away• Look for contamination -materials disposed of wrongly-• Professional companies can undertake waste audits on a fee-for-service basis c- Work out your collection requirements• Total the volumes of each type of waste per day• Some items can be combined such as glass, metal, plastic, paper & milk cartons - referred to as‘co-mingled' waste- -but, no food scraps, polystyrene or plastic bags-• Calculate the required bin size and frequency of collection - e-g- if your property produced 242-5 litres of ‘co-mingled waste' per week then 1 x 250 litre bin should be sufficient with a once a week collection frequency- Calculate the daily total amount of rubbish from each department ‘Area' d- Review the packaging from your supplies• Attempt to reduce or eliminate waste at the source SITXFIN003 Manage finances within a budget Performance objective: The purpose of this assessment is to assess your ability to complete tasks outlined in elements and performance criteria of this unit in the context of the job role, and: a- manage a budget for a business over a three-month period that meets the specific business' needsb- undertake at least two of the following to inform management of the above budget:o discussions with existing supplierso evaluation of staffing and rostering requirementso evaluation of impact of potential roster changeso review of operating procedureso sourcing new suppliersc- monitor income and expenditure and evaluate budgetary performance over the above budgetary life cycled- complete financial reports related to the above budget within designated timelines and using correct budget terminology PART A Case Study Analysis on Budget Variance Top of the Town Hotel has asked you to calculate the variance for the following figures for the month of July and August- Also calculate the total profit that was budgeted and actual- Analyse the findings and inform them about the variance as they are concerned and would like to monitor the income, expenditure, profit levels, budgetary performance of their Food and Beverage Department- The Hotel owners and managers would like to know from you the major areas of concern where there is a deviation that needs further monitoring and improvement- PART B Answer the following questions-Questions:1- Explain the importance to the owners of monitoring budgets and why do you think it will help them to manage their finances better for the business-2- Explain to them the use of analysing the monthly budget and comparing the forecasted budget against the actual budgets-3- Explain your findings and possible reasons for these variances-4- What improvements can be done to overcome the variance between forecasted and actual budget???? Part C Variance Analysis In this part you are provided with an excel file with 2 spread sheets -Budgeted Rooms Revenue Sheet, Actual Rooms Revenue sheet- with the actual figures on the rooms for a given quarter- You are required to calculate the actual revenue that has been generated for each month in the given quarter based on the actual occupancy rate- Calculate the following details using the appropriate sheet as per the given instructions Budgeted Rooms Revenue Sheet Refer to the projected data sheet-• In this sheet first calculate the total projected/forecasted revenue per room type for all 365 days-• You are also required to calculate total projected/forecasted revenue per room type for each month for Jan, Feb and Mar-• Calculate the total rooms for each month• Calculate the Total Revenue for all room types for each month• Calculate the total projected revenue for 3 months -Jan, Feb and Mar- Actual Rooms Revenue Sheet• In this sheet you are provided with the Actual occupancy for each month-• Calculate the Revenue per room type for each month -Jan, Feb and Mar-• Calculate the total rooms for each month• Calculate the Total Revenue for all room types for each month• Calculate the Variance for each room type for each month -Note before you can do this calculation you have first calculated the budgeted rooms revenue for each month as instructed above using the Budgeted Room Revenue sheet-• Calculate the variance % Attachment:- Health and safety practices-rar

Most Recent Questions


Helping Students for Excellence in Academics, GET Help with Assignment? Order Now